> Products > Ceramics  Bogie-hearth furnaces Bogie-hearth furnaces T max. 900 °C, 1280 °C, 1340 °C and 1400 °C Robust housing design with double-walled lining and rear ventilation, exceptionally low outer-wall temperature Furnace door designed as hinged door, simple and easy to open Door lintel made of stainless steel, corrosion resistant Stable bogie hearth on highly rigid PU-coated steel wheels, freely movable, easily steered Air inlet sliding valve in bogie hearth for controlling cooling air inflow, exhaust flap in furnace roof Multilayer, asbestos-free insulation (lightweight refractory bricks and rear insulation), low heat loss, low energy consumption Heated from five sides (from both sides, rear wall, door and bottom), uniform temperature distribution in furnace chamber High-quality heating wire securely mounted to prevent slippage Heating elements wound on ceramic tubes and mounted in front of furnace wall, free heat radiation into chamber with resultant energy savings and longer service life Bottom heating elements in bogie hearth covered by diathermic SiC plates, high mechanical strength, protection for bottom heating

Bogie-hearth furnaces - Customised designs - Furnace system for sintering ceramic fuel cells, consisting of 1 x WKF 1200/09 and 2 x WKF 2600/09 Prepared for operation with process gas T max. 900 °C Temperature uniformity +/- 5K With horizontal air circulation at 900 °C, speed-controlled circulation motors Air duct system made of rustproof heat-resistant steel 3-zone regulation Automatic cooling system Exhaust air extraction via automatic flap control in furnace roof Furnace chamber with fibre insulation for short cycle times Furnace systems with transverse shunting device While one bogie is in the furnace, two additional bogies can be loaded. All bogie hearths are rail-bound and can be pushed into the parking rails via the transverse shunting device either manually or by an electric drive 7-zone furnace regulation, excellent temperature uniformity, also in lower region Fan cooling with automatic exhaust flaps, faster cooling possible Stainless steel hood with extractor

Bogie-hearth furnaces T max. 900 °C, 1280 °C, 1340 °C and 1400 °C Additional equipment: Customised furnace sizes Furnaces also available with complete fibre insulation and meander-shaped heating elements for fast firing cycles Configuration with second door instead of rear wall and with two bogie hearths for loading batches from both sides Lifting doors with electrical or hydraulic drive Bogie hearths on rails with steel wheel for heavy loads Electrical bogie-hearth drive unit Customised transverse shunting device in front of the furnace, with parking rails Automatic regulation of inlet and exhaust flaps Cooling system with manual or automatic regulation Multi-zone control for optimised temperature uniformity Thermal or catalytic exhaust air purification systems Furnace furniture according to customer specifications (1) WK 1000/14: Bogie-hearth furnace for T max. 1400 °C, with two hydraulic lifting doors, two rail-bound bogie hearths with electrical drive and Siemens S7 controller (2) Furnace complete with fibre insulation, heating elements made of meander-shaped heating bands, heating from four sides

(1) (2)