Entdecken Sie das vielseitige Produktprogramm von THERMCONCEPT: <strong>Gas-fired furnaces and systems up to 1600 °C</strong>

Gas-fired furnaces

Gas-fired furnaces T max. 900 °C - 1400 °C

For the temperature range between 900 °C and 1400 °C, THERMCONCEPT supplies different furnaces individually designed to meet the specific requirements of customers:

Furnace systems for temperatures up to 1400 °C
Various furnace types (chamber furnaces, bogie hearth furnaces, hood furnaces, driving hood furnaces)
Superb firing results
Low power consumption due to special multilayer refractory lining with best insulation properties
Burner systems with large performance range, specially designed to match the furnace
Automatic control of burner atmosphere
Start-up of furnace at low temperature with high temperature uniformity and without sudden temperature changes
Optimal temperature distribution by means of multi-zone control and special flue gas routing system
Cutting-edge control and regulation system with optimal process control for fully-automatic system operation, perfectly matching the needs of users
Minimal maintenance required

Bogie-hearth furnaces T max. 1400 °C
Bogie-hearth furnaces for sintering pigments. Useable space: 1100 x 3100 x 1500 mm (wxdxh). Fitted with manually operated revolving door and electrical bogie-hearth drive unit. Each furnace is fitted with two bogie hearths. The furnaces have a 3-layer insulation lining made of lightweight JM 30 refractory bricks (graded for up to 1600 °C). Heating is performed by eight high-speed burners each having a rated power of 150 kW. Fully automatic furnace regulation with regulated cooling of batch in furnace. Number of regulated zones: 3. The furnace system is also designed for operation under a reducing atmosphere.

Bogie-hearth furnaces T max. 1200 °C
The entire inner furnace chamber is lined with ceramic plates. This prevents any contamination of the goods with fibre particles or other impurities.

Gas-fired furnaces T max. 900 °C - 1400 °C

Chamber furnaces T max. 1100 °C
The system consists of three furnaces and is used for firing SiC catalysts.
Useable space:
KK 2400/11: 1650 x 1200 x 1200 mm (w x d x h)
KK 4200/11: 2700 x 1300 x 1200 mm (w x d x h)

The furnaces are fitted with a hydraulic lifting door. Heating is carried out by eight or ten high-speed burners. Fully automatic furnace regulation with regulated cooling of batch in furnace. Number of regulated zones: 2

Hood furnaces T max. 1200 °C

Useable space: 11000 x 3000 x 1500 (w x d x h)
Useable volume: approx. 50 m³
The heating mantle is raised hydraulically. Fast, convenient loading and unloading of the furnace is possible from both sides

Bogie-hearth furnace for temperatures up to 1200 °C

Useable space: 6000 x 8000 x 4000 mm (w x d x h)
Useable volume: approx. 200 m³
Electrically operated lifting door and electrical bogiehearth drive unit
Heated by 26 high-speed burners
Fully automatic furnace regulation across eight regulated zones
The furnace system is also suitable for operation under a reducing atmosphere.

Gas-fired high-temperature furnaces T max. up to 1600 °C

In the production of technical ceramics and refractory materials, gas-fired high-temperature furnaces are often used for sintering the components. THERMCONCEPT supplies different furnace concepts that allow precise adaptation to the respectively required process.

Furnace systems for temperatures up to 1600 °C
Various furnaces types (chamber furnaces, bogie hearth furnaces, hood furnaces, driving hood furnaces)
Superb firing results
Low power consumption due to special multilayer refractory lining with best insulation properties
Burner systems with large performance range, specially designed to match the furnace
Automatic control of burner atmosphere
Start-up of furnace at low temperature with high temperature uniformity and without sudden temperature changes
Optimal temperature distribution by means of multi-zone control and special flue gas routing system
Cutting-edge control and regulation system with optimal process management for fully-automatic operation, perfectly matching the needs of users
Minimal maintenance required

Driving hood furnace system 1600 °C
Driving hood furnace system for firing SiC crucibles up to T max. 1600 °C.
Useable space: 2800 x 8300 x 2500 mm (w x d x h).
The heated furnace hood is moved alternately between two positions. Electrical drive. Space for an additional furnace system is already prepared.

Gas-fired high-temperature furnaces T max. up to 1600 °C

Chamber furnace 1600 °C
Gas-fired chamber furnaces for sintering pigments with nine burners. Short cycle times due to automatically controlled cooling fan

Bogie-hearth furnace 1600 °C
Bogie-hearth furnace for sintering pigments in capsules, with transverse shunting device. The bogie hearths are rail-bound and are moved into the parking rails by electrical drives.

Bogie-hearth furnace 1600 °C
Gas-fired bogie-hearth furnace with transverse shunting device for sintering grinding discs. While one bogie is in the furnace, two additional bogies can be loaded.
All bogie hearths are rail-bound and can be pushed into the parking rails via the transverse shunting device either manually or by an electric drive.

Hood furnace 1600 °C
This gas-fired furnace system is designed as a hood furnace and is used for sintering insulators.