home  ι  impressem   ι  PRINT
 
ProductsHeat treatment of metalsHeat treatment of plasticsFoundryCeramicsGlassResearch and laboratoryDentalProcess control systemsServiceCompanyNewsContact  
> Products > Foundry 

Electrically heated Bale-out Furnaces

Electrically heated Bale-out Furnaces
T max 1100 °C, 1200 °C and 1300 °C
  • Rugged casing construction
  • Compact construction > Easy access to metal bath
  • Friendly working conditions due to excellent thermal insulation
  • Low energy consumption, low operating costs (approx. 0.4 kWh/kg aluminium)
  • High-quality heating elements wound on ceramic tubes > Free heat radiation onto crucible, low energy consumption, longer service life of heating elements
  • Uniform heating of melt and crucible due to heating from 4 sides, superb metal quality, good crucible life
  • Heat-resistant cast-iron ring on removable refractory concrete cover protects crucible against mechanical damage and allows easy access for crucible change
  • Emergency outlet drain
  • Cable harness between control panel and furnace protected by flexible metal conduit, providing optimum protection against mechanical damage
  • Low maintenance costs
Furnaces also supplied for holding only (with lower power ratings).
 
TA 200/11 Schöpf-Tiegelöfen
TA 200/11
TA 200/11 Schöpf-Tiegelöfen skizze

Technical Data

Model Crucible
Melting rate*
[kg/h Al at 700°C] 		Melting rate*
[kg/h Cu at 1000°C] 		Power
[kW] 		T max
[°C] 		Outside dimensions
[mm]
A            B            C		 Voltage Weight
[kg] 
TA  30/11 A   70 35 - 18 1100 860 860 810 400 3/N 500 
TA  50/11 A 150 45 - 21 1100 860 860 870 400 3/N 570 
TA 100/11 A 300 60 - 27 1100 1010 1010 910 400 3/N 710 
TA 200/11 BU 200 130 - 53 1100 1160 1160 950 400 3/N 810 
TA 300/11 BU 300 140 - 63 1100 1210 1210 1050 400 3/N 1070 
TA 350/11 BU 350 160 - 68 1100 1210 1210 1270 400 3/N 1120 
TA 500/11 BU 500 170 - 72 1100 1390 1390 1270 400 3/N 1300 
TA 600/11 BU 600 210 - 82 1100 1390 1390 1420 400 3/N 1420 
TA 800/11 BU 800 260 - 102 1100 1430 1430 1490 400 3/N 2300 
 
TK  70/12 A   70 35 50 18 1200 860 860 810 400 3/N 720 
TK 150/12 A 150 45 65 21 1200 860 860 870 400 3/N 790 
TK 300/12 A 300 60 85 27 1200 1010 1010 910 400 3/N 920 
TK 500/12 BU 200 130 195 53 1200 1160 1160 950 400 3/N 1150 
 
TK  70/13 A   70 35 50 18 1300 860 860 810 400 3/N 720 
TK 150/13 A 150 45 65 21 1300 860 860 870 400 3/N 790 
TK 300/13 A 300 60 85 27 1300 1010 1010 910 400 3/N 920 
TK 500/13 BU 200 130 195 53 1300 1160 1160 950 400 3/N 1150 
Other sizes on request · * The melting rates depend on crucible conductivity and specific operating conditions. Approx. 80% is achieved under normal conditions.