Entdecken Sie das vielseitige Produktprogramm von THERMCONCEPT: <strong>Furnaces and plants for production</strong><br /> 

Furnaces and plants for production

For all important heat treatment applications THERMCONCEPT supplies a wide range of furnaces and plants for production. Please ask for our special catalogues.

Chamber-, bogie hearth-, hood- and pit-type furnaces
Electrically heated or fuel-fired
Large range of standard furnaces as well as tailor made furnace lines
Normal- and protective gas atmosphere
From manually up to fully automatic controlled operation

High temperature chamber furnace up to 1600 °C
The shown chamber furnace with lift door is used for sintering of technical ceramics at high temperature. The furnace is heated by MoSi₂-heating elements. The useable volume is 43m³, the useable dimensions are
13200 x 1800 x 1800 mm (wxdxh).

Elevator furnace
Large scale elevator furnace up to 1800 °C, with up to 2000 litres inner volume and 1 to charge weight for sintering of insulation panels. Both bottom hearths will be driven for loading and unloading to the left and right side. Due to the control system a fully automatic operation is possible.

Bogie hearth furnace up to 1800 °C
Bogie hearth furnaces electrically heated with MoSi₂ elemets up to 1800 °C. The furnaces are heated from 3 sides.

Bogie hearth furnace
Electrically heated bogie hearth furance up to 1400 °C with two electro-hydaulic lift doors and two bogies with chain drive.

Tube furnaces up to 1800 °C
Tube furnaces used for production of ceramic powder in protective gas atmosphere. The work tube is equiped with gas-tight, water cooled flanges made of stainless steel. Including gas control station for four furnaces.

6-tube special furnace up to 1600 °C
High temperature tube furnace with 6 ceramic work tubes. The heated length of 2000 mm is splitted into 5 heating zones. MoSi₂-heating elements are mounted freely hanging also between the tubes to optimize the temperature uniformity. To purge work tubes with protective gas like Argon, Nitrogen or Hydrogen, each work tube is equiped with gas-tight, water cooled flanges.

Gas-heated chamber furnace up to 1200 °C
Gas-heated furnace line, consisting of two chamber furnaces for oxidizing of catalytic converter made of Siliconcarbide (SiC) and one chamber furnace to burn out catalyzer honeycombs.

Gas-heated hood furnace up to 1600 °C
The shown gas-heated hood furnace is used for sintering of electric insulators.
Gas-heated furnaces are also available as bogie hearth furnaces or table furnace consisting of 2 fixed furnace tables and a heated furnace casing which drives over both tables alternately.